ICAM-500 Programming Guide
34
set_img_auto_exposure
(
enable
)
Enable camera auto exposure function.
Parameters: enable
1: Enabled
0: Disabled
Returns:
bool
Camera auto exposure function status.
1: Enabled
0: Disabled
See also:
image.CImage.auto_exposure
Control by image instance.
get_img_auto_exposure_range
()
Get auto exposure range.
Returns:
tuple(int, int)
Auto exposure range. (min, max) Value convert equation: value
* 100 (micro sec.)
See also:
image.CImage.auto_exposure_range
Control by image instance.
set_img_auto_exposure_range
(
min, max
)
Set auto exposure range.
Exposure time value spec:
init value = (50, 10000)
range = [1..10000]
step = 1 Convert equation: exp_time * 100 (micro sec.)
Parameters: min
Minimum value of auto exposure time.
max
Maximum value of auto exposure time.
Returns:
tuple(int, int)
Auto exposure range. (min, max) Value convert equation: value
* 100 (micro sec.)
See also:
image.CImage.auto_exposure_range
Control by image instance.
Summary of Contents for ICAM-500 Series
