ICAM-500 Programming Guide
20
***
This API can be set at run-time, but need to re-open (ie. Call advcam_close(),
then advcam_open() ) to take effect
advcam_get_acq_mode
(
cam
)
Get acquisition mode property.
Parameters: cam: ABSCamera
Camera instance
Returns:
int
Acquisition mode:
0: Free run mode
1: Software trigger mode
2: Hardware trigger mode
advcam_set_acq_mode
(
cam, acq_mode
)
Set acquisition mode property.
Parameters: cam: ABSCamera
Camera instance
acq_mode : int
Acquisition mode:
0: Free run mode
1: Software trigger mode
2: Hardware trigger mode
advcam_get_focus_distance
(
cam
)
Get lens focusing motor distance.
Parameters: cam: ABSCamera
Camera instance.
Returns:
int
Lens focusing motor distance.
See also:
iCam500.iCam500.get_focus_distance()
advcam_set_focus_distance
(
cam, distance
)
Set lens focusing motor distance.
Parameters: cam: ABSCamera
Camera instance.
distance:
int
Lens focusing motor distance.
init value = 0
range = [0..1600]
default step = 30
See also:
iCam500.iCam500.set_focus_distance()
Summary of Contents for ICAM-500 Series
