Installing the HDD
-
The following HDD assembly model can only choose one of them
3.5’HDD Assembly
1. Remove the screw at the position shown by the arrow in the figure below and reserve it, and then remove the HDD bracket.
2. Take out the 4 teeth screws in the accessory box, and refer to the
figure below to attach the 3.5 ’HDD to the bracket.
3. After installing the HDD bracket on the base, confirm that the cables at the arrows in the figure below can be pulled.
4. Use the removed 4 screws to lock the HDD bracket, and plug the SATA cable and the Power cable from the power supply to the
HDD.
