Advantech EKI-6333AC-2G Series, User Manual

Page: 34 / 56

26 EKI-6333AC-2G Series User Manual
Access Point Mode
To access this page, click Wireless - 2.4GHz > Basic and select Access Point in
Operation Mode.
Figure 3.10 Wireless - 2.4GHz > Basic > Access Point
The following table describes the items in the previous figure.
Item Description
Wireless Network
Operation Mode Click the drop-down menu to select an operation mode: Access
Point, Client, Bridged Repeater.
WDS Click the radio button to enable or disable the Wireless Distribution
System (WDS) to allow you to link the Access Points wirelessly.
SSID Enter the name to distinguish it from other networks in your
neighborhood.
SSID Broadcast Click the drop-down menu to enable or disable the SSID broadcast
function. The function is only enabled when Operation Mode is set
to Access Point.
AP Isolation Click the drop-down menu to enable or disable the AP Isolation
function.The function is only enabled when Operation Mode is set
to Access Point.
BSSID Display the MAC address of the device.
Maximum Clients Enter the value (1 to 30) designating the maximum number of
clients per wireless device.
Management Frame
Protection Click the radio button to enable, disable, or set the function to
optional. The wireless feature increases the security of the
management frames, standard: IEEE 802.11W-2009.
Operation frequency