manualshive.com logo in svg

Advantech EKI-6333AC-2G Series, User Manual

The Advantech EKI-6333AC-2G Series is an advanced networking device offering seamless connectivity. For easy setup and operation, it includes a comprehensive User Manual that can be downloaded for free from manualshive.com. Get detailed instructions and ensure optimal usage of this product by accessing the manual from our website.

Share
Download
background image

EKI-6333AC-2G Series User Manual

25

When WAN Type (Network Mode) is 

PPPoE

, the 

PPPoE WAN Type 

configuration 

settings appear.

Figure 3.9 Interface > WAN > Network Mode > PPPoE

The following table describes the items in the previous figure.

3.3.3

Wireless 2.4GHz

To access this page, click 

Interface

 > 

Wireless - 2.4GHz

.

3.3.3.1

Basic

Basic wireless settings offer three types of configurable modes, Access Point, Client, 
and Bridged Repeater. 

The following descriptions provide further details for each specific mode. 

Item

Description

Network Mode

Click the drop-down menu to select the mode type: Disable 
(default), Static, DHCP, PPPoE.

WAN Interface

Click the radio button to select the specific interface to configure.

Username

Enter the PPPoE user name (account) provided by your service 
provider.

Password

Enter the PPPoE password provided by your service provider.

Service Name

Enter the service name if your ISP requires it.

MTU

Check 

Enable

 check box to enable the MTU (Maximum 

Transmission Unit) limit, and specify the MTU for the 3G/4G 
connection.
MTU refers to Maximum Transmission Unit. It specifies the largest 
packet size permitted for Internet transmission.
Value Range: 1200 ~ 1500.

Submit

Click 

Submit

 to save the values and update the screen.

Summary of Contents for EKI-6333AC-2G Series

























































Reviews:

No comments

Related manuals for EKI-6333AC-2G Series

T-Mobile Franklin T9 Getting Started preview
Franklin T9
Brand: T-Mobile Pages: 4
NETGEAR AirCard 815S User Manual preview
AirCard 815S
Brand: NETGEAR Pages: 98
One Touch Y280 User Manual preview
Y280
Brand: One Touch Pages: 12
Cambium Networks cnWave Series Quick Start Manual preview
cnWave Series
Brand: Cambium Networks Pages: 51
Kogan KAWRTBB300A User Manual preview
KAWRTBB300A
Brand: Kogan Pages: 16
D-Link DAS-3248 Quick Installation Manual preview
DAS-3248
Brand: D-Link Pages: 20
D-Link DI-624M - Wireless 108G MIMO Router Quick Installation Manual preview
DI-624M - Wireless 108G MIMO Router
Brand: D-Link Pages: 12
D-Link DHP-1220AV Quick Installation Manual preview
DHP-1220AV
Brand: D-Link Pages: 36
D-Link DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router Quick Installation Manual preview
DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router
Brand: D-Link Pages: 22
D-Link DI-514 - Wireless Router Quick Installation Manual preview
DI-514 - Wireless Router
Brand: D-Link Pages: 12
D-Link DIR-412 Quick Installation Manual preview
DIR-412
Brand: D-Link Pages: 34
D-Link DIR-301 User Manual preview
DIR-301
Brand: D-Link Pages: 67
D-Link DAP-1250 Install Manual preview
DAP-1250
Brand: D-Link Pages: 12
D-Link DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router Manual preview
DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router
Brand: D-Link Pages: 106
D-Link DIR-320NRU User Manual preview
DIR-320NRU
Brand: D-Link Pages: 156
D-Link DI-724GU - Wireless 108G QoS Gigabit Office Router User Manual preview
DI-724GU - Wireless 108G QoS Gigabit Office Router
Brand: D-Link Pages: 89
D-Link DI-711 - Gateway User Manual preview
DI-711 - Gateway
Brand: D-Link Pages: 60
D-Link COVR-C1213 User Manual preview
COVR-C1213
Brand: D-Link Pages: 113

Brands by name

Popular brands

Load more brands