Advantech EKI-6333AC-2G Series, User Manual

Page: 38 / 56

30 EKI-6333AC-2G Series User Manual
To access this page, click Wireless - 2.4GHz > Advanced .
Figure 3.13 Wireless - 2.4GHz > Advanced
The following table describes the items in the previous figure.
Item Description
Access Point Settings
Beacon Interval Enter a value (20-999) to specify the frequency interval to
broadcast packets.
Data Beacon Rate
(DTIM) DTIM, which stands for Delivery Traffic Indication Message, is
contained in the data packets. It is for enhancing the wireless
transmission efficiency. The default is set to 2. Enter a value
between 1 and 255.
20/40 Coexistence Select enable to select 20/40 MHz coexistence. Once enabled, the
device allows clients operating only on a single channel (20 MHz)
to connect to the wireless network (default: disabled).
HT LDPC Enable to advertise Low-density Parity Check (LDPC) support. By
enabling HT LDPC, the function improves data transmission over
channels with a high degree of background noise (default:
enabled).
Station Inactivity Time Enter the value in seconds (30 to 600, default 300) to define the
period of traffic inactivity for a client before the AP removes it.
Advanced Wireless Setting
RTS Threshold Enter a value (1-2347) to specify the request time to send
threshold.
Transmission Power Click the drop-down menu to set the transmission power (9 - 21
dBm) of the WiFi. By default the AP transmits at 21 dBm.
WMM Enable WiFi Multimedia (WMM) to enhance the quality of service
(QoS) on a network by prioritizing packet data based.