![background image](http://html1.mh-extra.com/html/advantech/eki-2701hpi-ae/eki-2701hpi-ae_user-manual_2857488016.webp)
EKI-2701HPI-AE User Manual
10
3.1
DIN-Rail Mounting
3.1.1
Assembling the DIN-Rail Clip
The DIN-rail clip is screwed on the device in the factory. If not, please refer to the fol-
lowing steps and figure to secure the DIN-rail clip on the device.
1.
Use the screws to secure the DIN-rail clip at the rear of the device.
2.
To remove the DIN-rail clip, reverse step 1.
3.1.2
Hanging the PoE Injector
Follow the steps below to hang the device on the standard DIN rail.
1.
First, position the rear side of the unit directly in front of the DIN rail. Make sure
the top of the clip hooks over the top of the DIN rail.
Summary of Contents for EKI-2701HPI-AE
