7
EKI-2701HPI-AE User Manual
Chapter 2
H
ardware
D
escription
2.5
RJ-45 Pin Assignments
The UTP/STP ports will automatically sense for Fast Ethernet (10Base-T/100Base-
TX) or Gigabit Ethernet (10Base-T/100Base-TX/1000Base-T) connection. Auto MDI/
MDIX means that the port can connect to another switch or workstation without
changing straight through or crossover cabling. See the figures below for straight
through and crossover cable schema.
10/100Base-TX Pinouts
The table below shows the 10Base-T/100Base-TX MDI and MDI-X port pinouts.
10/100Base-TX Cable Schema
Straight Through Cable Schema
Crossover Cable Schema
Caution! Use Copper Conductors Only, 60/75 C, tightening to 5 lb-in
The wire gauge for the terminal block should be in the range between 12
~ 24 AWG.
Pin Number
Assignment
1
Tx+
2
Tx-
3
Rx+
6
Rx-
Note!
"+" and "-" signs represent the polarity of the wires that make up each
wire pair.
Pin Number
MDI-X Signal Name
MDI Signal Name
1
Receive Data plus (RD+)
Transmit Data plus (TD+)
2
Receive Data minus (RD-)
Transmit Data minus (TD-)
3
Transmit Data plus (TD+)
Receive Data plus (RD+)
6
Transmit Data minus (TD-)
Receive Data minus (RD-)
Summary of Contents for EKI-2701HPI-AE
