![background image](http://html1.mh-extra.com/html/advantech/awmt/awmt_installation-and-operation-manual_2858636023.webp)
AWMT
22
Figure 5
: Typical Connector Layout (Ku-Band)
TABLE 3
: RELAY INTERFACE – PIN ASSIGNMENT
Pin
Signal Name
Description
A Tx
AL-NC
Normal closed contact of the
Tx ALARM
Form - C relay.
Pin A closed to pin B indicates ALARM in the transmission path.
B Tx
AL-COM
Common contact of the
Tx ALARM
Form - C relay.
C Tx
AL-NO
Normal open contact of the
Tx ALARM
Form – C relay.
Pin C open relative to pin B indicates ALARM in the transmission
path.
D Rx
AL-NC
Normal closed contact of the
Rx ALARM
Form - C relay.
Pin D closed to pin E indicates ALARM in the receive path.
E Rx
AL-COM
Common contact of the
Rx ALARM
Form - C relay.
F Rx
AL-NO
Normal open contact of the
Rx ALARM
Form - C relay.
Pin F open relative to pin E indicates ALARM in the receive path.
G Tx
MUTE
Tx MUTE command
:
If pin G is NOT connected to pin H, the transmission path is in
MUTE. If pin G is connected to pin H, the transmission path is ON.
H MUTE-COM
Common contact of the
Tx MUTE and Rx MUTE Commands
J Rx
MUTE
Rx MUTE command
:
If pin J is NOT connected to pin H, the receive path is in MUTE.
If pin J is connected to pin H, the receive path is ON.
K AN_OUT
Analogue Output - Output Power Monitor (voltage: 5 V DC at rated
P1dB; > 0 V DC at 20 dB back-off)
Summary of Contents for AWMT
