25
ARK-3403 User Manual
Chapter 3
B
IOS Settings
3.4.2
IDE Configuration
Figure 3.4 IDE Configuration
!
ATA/IDE Configuration
This item allows you to select Disabled / Compatible / Enhanced.
!
Legacy IDE Channels
When set to Enhanced mode you can select IDE or AHCI mode. When select
Compatible mode you can select SATA only / SATA pri, PATA sec or PATA only.
!
Primary/Secondary/Third IDE Master/Slave
BIOS auto detects the presence of IDE device, and displays the status of auto
detection of IDE device.
–
Type: Select the type of SATA driver.[Not Installed][Auto][CD/DVD][ARMD].
–
LBA/Large Mode: Enables or Disables the LBA mode.
–
Block (Multi-Sector Transfer): Enables or disables data multi-sectors trans-
fers.
–
PIO Mode: Select the PIO mode.
–
DMA Mode: Select the DMA mode.
–
S.M.A.R.T.: Select the smart monitoring, analysis, and reporting technology.
–
32Bit Data Transfer: Enables or disables 32-bit data transfer.
!
Hard Disk Write Protect
Disable/Enable device write protection. This will be effective only if device is
accessed through BIOS.
!
IDE Detect Time Out (Sec)
This item allows you to select the time out value for detecting ATA/ATAPI
device(s).
Summary of Contents for ARK-3403
