www.reer.it
8540759 Rev.1
5/8
FMC-EB
COLUMN FOR EOS LIGHT CURTAINS
GENERAL
These mounting instructions contain information about:
•
The correct mounting of the light curtains
EOS
inside the
FMC-EB
columns.
•
The assembly of the
FMC-EB
stand for mounting on the
FMC-CB/FMC-CBL
stand bottom.
•
The correct mounting of emitters and receives (with our without mirror).
•
Please find detailed information about the function of the light curtains / light grids in the relevant
mounting and wiring instructions.
MOUNTING ON THE FMC-CB/FMC-CBL STAND BOTTOM (Fig. 1)
•
Mount
the
FMC-CB/FMC-CBL
stand bottom on the floor (see mounting instruction for stand bottom).
Please note:
For a correct alignment, please verify that the stand bottom upper surface is even and horizontal (using a
circular spirit level).
To operate the regulation, act on the three hexagonal nuts B (fig.4) until the perfect levelness is reached.
(Maximum adjustment: 10mm). If the ground roughness is over 10mm, flush it adequately.
•
Loosen the three allen screws and remove the washers.
•
Assembly the column to the stand bottom, centering the
FMC-EB
column rotation flange with the
guides of the
FMC-CB/FMC-CBL
stand bottom upper plate.
•
Fix the column tightening the three allen screws and the washers.
Figure 1
