manualshive.com logo in svg

Advantech APAX-5013, User Manual

Share
Download
Advantech APAX-5013 User Manual Download Page 3

iii

APAX-5000 I/O Series User Manual

 

Declaration of Conformity

CE

This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.

FM

This equipment has passed the FM certification. According to the National Fire Pro-
tection Association, work sites are classified into different classes, divisions and
groups, based on hazard considerations. This equipment is compliant with the speci-
fications of Class I, Division 2, Groups A, B, C and D indoor hazards.

Technical Support and Assistance

1.

Visit the Advantech web site at www.advantech.com/support where you can find 
the latest information about the product.

2.

Contact your distributor, sales representative, or Advantech's customer service 
center for technical support if you need additional assistance. Please have the 
following information ready before you call:

–

Product name and serial number

–

Description of your peripheral attachments

–

Description of your software (OS, version, application software, etc.)

–

A complete description of the problem

–

The exact wording of any error messages

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from
damage.

To avoid electrical shock, always disconnect the power from your PC chassis 
before you work on it. Don't touch any components on the CPU card or other 
cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush of
power as you connect a jumper or install a card may damage sensitive electronic
components.

Summary of Contents for APAX-5013

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands