Advantech AIIS-5410P User Manual Download Page 45

Page: 45 / 89

AIIS-5410P User Manual

Chapter 3

MI BIOS

Setup

3.2.2.6

NCT6106D HW Monitor



Case Open Warning

This item allows user to enable or disable "Case Open Warning”.



CPU(PECI) Warning Temperature

This item allows user to change settings of CPU(PECI) Warning Temperature.
The default setting is “Disabled”.



CPU(PECI) ACPI Shutdown Temperature

This item allows user to change settings of CPU(PECI) ACPI shutdown temper-
ature. The default setting is “Disabled”.



PC Health Status

AIIS-5410P system has two temperature sensors. System (M/B), and CPU tem-
peratures are clearly displayed.

Note!

AIIS-5410P system does not by default have a case open switch in the
chassis. If your application needs a case open function, please contact
your distributor or sales representative.

Summary of Contents for AIIS-5410P


























































































Search results

Summary of Contents for AIIS-5410P

Reviews:

Related manuals for AIIS-5410P

Brands by name

Popular brands

Advantech AIIS-5410P, User Manual

Search results

Summary of Contents for AIIS-5410P

Reviews:

Related manuals for AIIS-5410P

Brands by name

Popular brands