![Advantech AIIS-5410P User Manual Download Page 6](http://html1.mh-extra.com/html/advantech/aiis-5410p/aiis-5410p_user-manual_2856813006.webp)
AIIS-5410P User Manual
vi
Safety Instructions
1.
Please read these safety instructions carefully.
2.
Please keep this User’s Manual for later reference.
3.
Please disconnect this equipment from AC outlet before cleaning. Use a damp
cloth. Don’t use liquid or sprayed detergent for cleaning. Use moist sheet or
cloth for cleaning.
4.
For pluggable equipment, the socket-outlet shall near the equipment and shall
be easily accessible.
5.
Please keep this equipment from humidity.
6.
Lay this equipment on a reliable surface when installing. A drop or fall could
cause injury.
7.
The openings on the enclosure are for air convection hence protecting the
equipment from overheating. DO NOT COVER THE OPENINGS.
8.
Make sure the voltage of the power source when connecting the equipment to
the power outlet.
9.
Place the power cord such a way that people cannot step on it. Do not place
anything over the power cord.
10.
All cautions and warnings on the equipment should be noted.
11.
If the equipment is not used for long time, disconnect the equipment from mains
to avoid being damaged by transient over-voltage.
12.
Never pour any liquid into ventilation openings; this could cause fire or electrical
shock.
13.
Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
14.
If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -40° C (-40° F) OR ABOVE 85°
C (185° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
17.
The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70 dB (A).
18.
RESTRICTED ACCESS AREA: The equipment should only be installed in a
Restricted Access Area.
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Summary of Contents for AIIS-5410P
