Advantech AIIS-5410P User Manual Download Page 54

Page: 54 / 89

AIIS-5410P User Manual

3.2.2.13

CSM Configuration



CSM Support

This item allows user to enable or disable "CSM Support".



GateA20 Active

This item allows user to set "GateA20 Active" to either Upon Request or Always.



Option ROM Messages

This item allows user to set "Option ROM Messages" to Force BIOS or Keep
Current.



INT19 Trap Response

This item allows user to set Immediate or Postponed for "INT19 Trap
Response".



Boot option filter

This item allows user to set UEFI and Legacy or Legacy only or UEFI only for
"Boot option filter".



Network

This item allows user to set Do not launch or Legacy for "Network".



Storage

This item allows user to set Do not launch or UEFI or Legacy for "Storage".



Video

This item allows user to set Do not launch or UEFI or Legacy for "Video".



Other PCI devices

This item allows user to set Do not launch or UEFI or Legacy for "Other PCI
devices".

Summary of Contents for AIIS-5410P


























































































Search results

Summary of Contents for AIIS-5410P

Reviews:

Related manuals for AIIS-5410P

Brands by name

Popular brands

Advantech AIIS-5410P, User Manual

Search results

Summary of Contents for AIIS-5410P

Reviews:

Related manuals for AIIS-5410P

Brands by name

Popular brands