![background image](http://html1.mh-extra.com/html/advantech/adam-4570w/adam-4570w_user-manual_2857239044.webp)
ADAM-4570W & 4571W User Manual
38
5. If you want to remove the COM port connection, click “Delete” to
remove it.
Figure 3.15: Remove COM port
6. After you complete the configuration, click ”Apply” .
3.3.1 Self Test Function
The purpose of this test is to make sure the communication from host PC
to ADAM-4570W/4571W is OK. If there is still an error, you can check
the communication from the ADAM-4570W/4571W to the serial devices.
If the test is selected, an external test will be done to check that the con-
nection signals for each port are working properly. For the test, you will
need to connect each port to a loopback tester (provided in the package).
The loopback test only applies to RS-232 mode. The test is divided into
two parts: Signal test and Communication Parameters test.
Summary of Contents for ADAM-4570W
Page 50: ...ADAM 4570W 4571W User Manual 44...
Page 54: ...ADAM 4570W 4571W User Manual 48...
Page 55: ...2 APPENDIX A Quick Start...
Page 60: ...ADAM 4570W 4571W User Manual 54...