manualshive.com logo in svg

Advantech ADAM-4570W, User Manual, Page: 2 / 62

Share
Download
Advantech ADAM-4570W User Manual Download Page 2

ADAM-4570W & 4571W User Manual

ii

Copyright

The documentation and the software included with this product are copy-
righted 2005 by Advantech Co., Ltd. All rights are reserved. Advantech 
Co., Ltd. reserves the right to make improvements in the products 
described in this manual at any time without notice. No part of this man-
ual may be reproduced, copied, translated or transmitted in any form or 
by any means without the prior written permission of Advantech Co., Ltd. 
Information provided in this manual is intended to be accurate and reli-
able. However, Advantech Co., Ltd. assumes no responsibility for its use, 
nor for any infringements of the rights of third parties, which may result 
from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of
Microsoft Corp.
All other product names or trademarks are properties of their respective 
owners.

Part No.2003457000

1st Edition

Printed in Taiwan

Ju

ly

 2005

Summary of Contents for ADAM-4570W































































Reviews:

No comments