12
-- SYSTEM SET --
PASSWORD
XXXX
To change password
To accept value keyed in
using number keys
PROPORTIONAL OUT
STRAIGHT OUT
ZERO IN
XXX psi
(Read only for diagnostics.
DAGF-2 systems have additional options.
Continue cycling down for each system.)
UNITS:
PSI
UNITS: BAR
Return to SYSTEM SET screen
SYSTEM SET
This menu is used to configure the controller to specific
operational needs. All of the items in this menu may
not apply depending on the controller model but will
always be present.
NOTE: Do not use this menu to make calibration
adjustments. Use the Calibration screen.
Some
features disabled and does not apply on this
model.
PASSWORD
- If a value of 0000 is entered, a password
is not required. If a password is entered, it must be
used to operate the controller. If the first digit is zero,
relays may be activated without a password.
ZERO IN
- CAUTION! This this function is used
only when there is zero or no pressure at the sensor
(Pressure Transducer). If ENTER BUTTON is pushed
when there is pressure at the sensor the accuracy
of the controller will be greatly effected. Refer to
troubleshooting section at end of manual.
ENTER
CLEAR
ENTER
ENTER
ENTER
