ADVANTAGE AIR MyAir, Installation Manual

Page: 10 / 23

Installation Guide V1.2
8
6 - FUJITSU (CB7 FJ) SETUP
CB7 FJ setup steps are as follows:
Optional: Connect a Fujitsu remote control and check unit works, before installing
MyAir controls.
1. Ensure power to the air conditioner is off & the Fujitsu wired remote control is
not connected to the system.
2. Connect the supplied cable from the CB to the indoor unit. Wire the cable cores
to the terminals as shown below:
CABLE CORE COLOUR INDOOR UNIT TERMINAL
RED 1 (RED)
WHITE 2 (WHITE)
BLACK 3 (BLACK)
3. Go to Section 15 SYSTEM CONFIGURATION to complete install
Note: If Auto Field Settings are disabled on the CB (see section 12) then the fi eld
settings will need to be set manually from a Fujitsu remote, to the values shown
below.
7 - LG (CB7 LG) SETUP
CB7 LG setup steps are as follows:
Optional: Connect a LG remote control and check unit function, before installing
MyAir controls.
1. Ensure power to the air conditioner & controls is off.
2. Remove the LG wired remote controller and connect the supplied cable from
the CB to the connector for the remote.
3. Go to Section 15 SYSTEM CONFIGURATION to complete install
Return Air Sensor
Function
Number
42 00
Setting
Value
MyZone Sensor
48 00
Function
Number
42 01
Setting
Value
48 01