Using the iRise
Connections:
Connecting to an external device
- Use a 3.5mm to 3.5mm audio cable
(included) to connect the external audio
device headphone socket to the LINE IN
socket on the unit.
Setting up the FM aerial
- Unwind the coiled FM aerial at the back of
the docking station.
IMPORTANT: You may need to adjust the position of
the FM aerial when tuning the radio to receive the
strongest signal. Never leave the aerial where it can be
pulled by young children.
Powering the iRise
1. Slot the jack plug on the power adaptor into the power
point in the underside of the base as shown in the diagram
above.
2. Slot the power adaptor into a wall socket and turn the
power on, if required.
Note:
- You need to connect the DC power to turn on the unit. Battery is for
backup only.
- If the timer does s t o p s working the battery needs replacing, please
disconnect the DC power and replace with a new battery, then
reconnect DC power and reset the clock.
4.
