Setting the alarm timer:
You can set two alarms which wake up at different time. However the clock must be set correctly
for the timer function to work.
1 In standby mode, press and hold the AL1 or AL2 button for several seconds, time indicator will
blink.
2 Set the minute with the TU+/ button and set the hour with the /TU- button.
3 Press the VOL-/AL1 or VOL+/AL2, then press buttons to select an alarm sound source:
buzz, FM, iPod.
4 Press the VOL-/AL1 or VOL+/AL2 button, volume indicator will blink. Set the alarm volume with
the buttons.
5 Press the VOL-/AL1 or VOL+/AL2 button to confirm.
• Activate and Deactivate the Alarm Timer
Press VOL-/AL1 or VOL+/AL2 repeatedly to activate or deactivate the timer.
• Stop Alarm Ring
When the alarm rings, press the button. The alarm stops but the alarm settings remain.
Note:
- For the SNOOZE function, when the alarm is activated, press any key except the button.
to repeat the alarm.
Setting the sleep timer
This unit can switch to standby automatically after a set period of time.
1 Press MEM/SLEEP button repeatedly to select a set period of time (in minutes):
- When the sleep timer is deactivated, “Zzz” disappears on the display.
LINE IN Operation
1 Ensure that the unit is connected to the TV or audio device.
2 Press the button to switch LINE IN mode.
3 Operate your audio device directly for playback features.
4 Press the VOL +/– button to adjust the volume to your desired level.
7.
