General Operation:
Turn ON/OFF
When you first connect the unit to the mains socket, the unit will be in STANDBY mode.
• Press the button to turn on.
• Press the button to turn off again.
- Disconnect the mains plug from the mains socket if you want to switch the unit
off completely.
- If there is no signal under the DOCK and LINE IN modes, the unit will automatically
switch off within 15 minutes.
Select Modes
Press the button repeatedly to toggle between LINE IN or FM or DOCK mode.
Adjust the Brightness
In standby mode, press the NAP/DIMMER button to select brightness level.
Set the NAP Timer
- Press the NAP/DIMMER button repeatedly to select time (in minutes):
- The system is now set to buzz after the number of minutes you have set.
Setting the Clock
In standby mode, The built-in clock shows the correct time in the display.
1 In standby mode, press and hold the CLOCK button to activate the clock setting mode,
the time indicator will blink.
2 Set the minute with the TU+/ button.
3 Set the hour with the /TU- button.
4 Press the CLOCK button to confirm, the built-in clock starts operating and the seconds start
counting from 0.
Tip:
During Time Setup, press the button to select between 12 & 24 hour format.
• View the Source
- During play, press the CLOCK button to show the current source on the display for a few
seconds.
6.
7.
