Epoch-M1C RF Repeater
User Manual V1.1
Advanced RF Technologies, Inc. Proprietary Document
Page 22 of 38
2.1.4
Install Window
At the time of installation, the installer needs to go to the Install Window of the
Epoch-M1C Software. The Install Window will guide the installer through a step
by step process to properly install the Epoch-M1C repeater.
For setup or installation of Epoch-M1C, go to the Install
Window.
Band
As shown on Figure 9, simply click on the desired band. To uncheck a
band, click on it again.
SNMP
(only applicable if a wireless modem is connected to the repeater)
a. Site ID
The
Site ID is a unique ID for each site and will be provided by the
Wireless Provider.
b. Manager IP
The
Manager IP address will be provided by the Wireless Provider. The
repeater will send alarms to the Wireless Provider’s NOC to the assigned
Manager IP address.
Modem
(only applicable if a wireless modem is connected to the repeater)
The
Auto Connection box needs to be checked when the wireless modem
is installed inside the repeater. A wireless modem is used in order to
send the alarms and the heartbeat over the air to the Wireless Provider’s
NOC.
Figure 9 - Install Window of the Epoch-M1C Software
