Spatial FOG Reference Manual
Page 53 of 144
Version 2.3
03/05/2018
11.1
Software Changelog
Version
Date
Changes
4.4
12/04/2016 Extended NTRIP support for older versions
Log converter now outputs a KML file for Google Earth
with detailed information as well as the GPX file
Added serial port passthrough tool
Secondary antenna raw satellite data is now converted to
RINEX as well as the primary antenna
4.3
17/08/2015 Spatial Manager now requests all configuration upon
connection
Spatial Manager converts any configuration packets found
in ANPP log files into text
Bug fix for NTRIP invalid connection
4.2
02/04/2015 Added network connection capability
Added NTRIP client
Two new satellite views in satellites dialogue
Added gimbal configuration dialogue
Heave ofsets changed to reference point ofsets
4.0
10/10/2014 Improvements to the 3D map
Support for more graphics cards
Status display now shows when heading not initialised
Communications dialogue added, section 11.7.9
GNSS receiver dialogue added, section 11.7.10
Heave dialogue added, section 11.7.11
North seeking status dialogue added, section 11.7.12
GPIO output configuration dialogue added, section 11.8.10
Dual antenna configuration dialogue added, section
11.8.12
Configuration dialogues now auto update
3.1
15/10/2013 Added 3D model dialogue, section 11.7.8
Added configuration export dialogue, section 11.8.1
3.0
13/09/2013 Initial Release
11.2
System Requirements
The software includes a 3D mapping display which requires a modern 3D graphics card
and up to date drivers to run. If your machine does not meet the graphics
requirements the mapping view will only show space without a globe.
When Spatial FOG is running at very high output rates e.g. 1000 Hz, Spatial FOG
Manager can consume significant system resources handling the large quantity of
data.
11.3
Installation
Spatial FOG Manager does not need to be installed and can be run from any directory
