9/04/2015
Free Standing Kiosk
Assembly and Operation Instructions
www.advancedkiosks.com
12
Installing Optional Equipment
Label Printer
The Free Standing Kiosk’s printer option is designed to handle several different label
printers. These being the: Zebra LP2844, Zebra LP2844-Z, Brother QL-1050 and many
other models.
To install the printing hardware you first must mount the printer shelf. Insert the printer
shelf through the back of the kiosk. Secure to the shelf to the studs on the inside of the
kiosk using two wing (8-32). Then use two standard (8-32) bolts to secure the shelf to the
outside of the kiosk. See pictures below.
Top view of printer shelf
Bottom View Printer shelf with
Power
supply
attached.
Once the printer shelf is installed, place the printer on the shelf. Before sliding the printer
forwards, pull out some of the media to make sure that the printer paper lines up with the
printer slot. The label should exit the middle of the slot. Having the labels come out too
high can interfere with tearing off the labels. Adjust the shelf up and down if needed and
then tighten screws. The cables for connection to the computer and the power supply
should be connected. Use Velcro to hold these in place. Slide the printer in place and use
the bungee cord to secure it. See picture below.
Wing Nut 2X
Screws
Feed
Cables
In
