9/04/2015
Free Standing Kiosk
Assembly and Operation Instructions
www.advancedkiosks.com
9
Installing the Kiosk
The
Free Standing Kiosk
can be left free standing, secured to the floor permanently or
mounted to the wall. Find a suitable location that you would like to mount the kiosk.
Location
The kiosk should not be placed in an area where a heating vent is directly venting
on the kiosk. The floor area also must be level, so that the kiosk does not wobble.
Securing the Kiosk to the Floor
There are two holes located in the back of the base for securing the kiosk to the floor, see
image below, these holes are located 17 inches apart. Place the kiosk in the location that
you want it to be mounted at, keeping enough room for people to use the kiosk and not
interrupt the flow of traffic. Use the kiosk as a template and mark the location of the
holes. Drill the holes at the marked locations sized for the hardware. Then with
appropriate hardware for your floor, bolt, or screw through the holes in the back of the
kiosk base and into the floor. Your kiosk is now secured in place.
Diagram 1, Free Standing Base
