Operation
4-2
Right Hand Control Panel
The right hand control panel looks like the figure below.
Nip Roll Switch:
This switch will open and close the nip rolls.
Drive Control
:
E-Stop
switch will stop the laminator and open the rolls.
Speed Pot
sets the laminators speed. 0-20 FPM
FWD/REV
switch selects the direction of the machine.
STOP
button will stop machine.
RUN
button will put machine into continuous run mode.
Reset
button resets the machine after an E-stop condition or at initial
startup. Hold button for 15 seconds after turning main power switch
on.
Figure 1 Right Hand Control Panel
