ADTRAN TSU 600 User Manual Download Page 63

Page: 63 / 133

Chapter 3. Operation

61200.076L2-1

TSU 600 User Manual

Test

The execution of tests will disrupt some normal operations.
See individual menu items concerning tests before executing
any.

The Test menu is used to initiate different types of
tests of the unit and to view test results. Test results
are displayed in the LCD window. The menu contains
the following items:

Network Tests

Network Tests control the activation of loopbacks and
the initiation of data test patterns.

Run Self Test

Run Self Test executes a full internal self test.

Port Test

Port Test is used to test specific data ports.

Cancel Tests

Cancel Tests deactivates all tests.

Opening Menu Functions: Detailed Discussion

The four opening menu functions, Status, Configura-
tion, Utility, and Test, are discussed in great detail in
the pages that follow.

Summary of Contents for TSU 600






































































































































Search results

Summary of Contents for TSU 600

Reviews:

Related manuals for TSU 600

Brands by name

Popular brands

ADTRAN TSU 600, User Manual

Search results

Summary of Contents for TSU 600

Reviews:

Related manuals for TSU 600

Brands by name

Popular brands