ADTRAN T3SU 300, User Manual

Page: 73 / 145

Chapter 4. Status
61202217L1-1B T3SU 300 User Manual 73
T1 Status
This field displays the current status of the Quad DSX-1 interface
card. Some conditions are given for each of the four individual
ports, while others apply to the entire card. Possible states are listed
in the following charts:
Waiting for DTE The port has been configured and is waiting for the DTE
to issue the appropriate handshaking signals. For the
HSSI interface, the terminal equipment available (TA)
signal must be asserted by the DTE. For V.35, DTR is
required if the TR field is set to
I
DLE
W
HEN
O
FF
;
otherwise, DTR is ignored. The TR field is found in the
DTE P
ORT
C
ONFIGURATION
menu.
Condition Description
Condition Description
Status conditions for an individual DSX-1 port
Off The DSX-1 port has been turned off by the user.
OK The DSX-1 port is on and is capable of passing data.
Red The DSX-1 port detects a loss of signal and is in red
alarm.
OOF The DSX-1 port detects an out of frame condition from
the network.
Yel The DSX-1 port detects a yellow alarm condition.
Blue The DSX-1 port detects a blue alarm condition
(unframed all ones).
Tst The DSX-1 port is in test.