3
Enabling Support for Mitel SIP Phones
1.
Run the
Server Configuration Wizard
by selecting
Start > All Programs > UC Server >
Server Configuration Wizard
.
2.
Select
Phone Types
.
3.
Select
Next
.
4.
Select the check box next to
Mitel
(see the figure below).
5.
Continue through the wizard by selecting
Next
at each page until the wizard is finished.
DHCP Server Configuration
When a Mitel phone is plugged into the network, it retrieves its IP address from the Dynamic Host
Configuration Protocol (DHCP) server. It also checks one of the options for the IP address of the Trivial
File Transfer Protocol (TFTP) provisioning server. If this option is not present, Mitel phones do not
automatically upgrade their firmware, nor are they automatically provisioned.
To configure the DHCP server for Windows® Server 2003/2008 and Windows Small Business
Server (SBS):
1.
Select
Start > Control Panel > Administrative Tools > DHCP
.
2.
Right-click the domain where you want the Mitel phones to be provisioned and select
Set
Predefined Options
.
