ADTRAN eSBC, Interoperability Manual

Page: 22 / 22

Integrating ADTRAN eSBC and NEC SV8100 Additional Resources
6AOSSG0027-42A Copyright © 2015 ADTRAN, Inc. 22
Configuring the SIP Trunk Settings (84-14: SIP Trunk Basic Setup)
To configure the SIP trunk basic setup, follow these steps:
1. Select the System Data tab, then select 84-XX: VoIP Hardware Setup > 84-14: SIP Trunk Basic
Setup from the System Data pane. The 84-14: SIP Trunk Basic Setup menu will appear.
2. In the 84-14: SIP Trunk Basic Setup menu, perform the following:
a. Select Request URI using the 09 - Called Party Info drop-down menu.
b. Select SIP-URL using the 10 - URL Type drop-down menu.
c. Select SIP UA Domain using the 11 - URL/TO Header Information drop-down menu.
3. Select Apply to apply the settings.
Additional Resources
There are additional resources available to aid in configuring your ADTRAN eSBC unit. Many of the
topics discussed in this guide are complex and require additional understanding, such as using the CLI,
eSBC in AOS, and ANI/DNIS substitution. The documents listed in
Table 2 are available online at
ADTRAN’s Support Forum at https://supportforums.adtran.com .
Feature Document Title
All AOS Commands Using the CLI AOS Command Reference Guide
ANI and DNIS Substitution Enhanced ANI/DNIS Substitution in AOS
eSBC Product Overview Session Border Controllers in AOS
Media Anchoring Configuring Media Anchoring in AOS
Table 2. Additional ADTRAN Documentation