Integrating ADTRAN eSBC and NEC SV8100
Configuring the NEC SV8100
6AOSSG0027-42A
Copyright © 2015 ADTRAN, Inc.
18
Configuring the System Number Plan (11-01: System Numbering)
The numbering plan defines the first and second digits dialed and specifies the digits a user must dial to
call other extensions and access features. To configure the numbering plan, follow these steps:
1. Select the
System Data
tab, then select
11-XX: System Numbering Plan > 11-01: System Numbering
from the
System Data
pane. The
11-01: System Numbering
menu will appear.
2. In the
11-01: System Numbering
menu, perform the following:
a. For the
1x
dial digit, enter
3
in the
Dial Digit Length
field, and select
Extension
from the
Type
drop-down menu.
b. For the
9x
dial digit, enter
1
in the
Dial Digit Length
field, and select
Trunk
from the
Type
drop-down menu.
3. Select
Apply
to apply the settings.
Configuring the Trunk Access Code (11-09: Trunk Access Code)
The trunk access code is the code extension users dial to access automatic route selection. To configure the
trunk access code, follow these steps:
1. Select the
System Data
tab, then select
11-XX: System Numbering Plan > 11-09: Trunk Access Code
from the
System Data
pane. The
11-09: Trunk Access Code
menu will appear.
2. In the
11-09: Trunk Access Code
menu, enter the desired trunk access code in the
01 - Trunk Access
Code
field.
3. Select
Apply
to apply the settings.
Configuring Night Mode Switching (12-01: Night Mode Switching Setup)
The night mode provides for scheduling different call behaviors for different time periods. Night mode
switching should be set for manual operation to keep the call routing fixed. To enable manual night mode
switching, follow these steps:
1. Select the
System Data
tab, then select
12-XX: Night Mode Service > 12-01: Night Mode Switching
Setup
from the
System Data
pane. The
12-01: Night Mode Switching Setup
menu will appear.
2. In the
12-01: Night Mode Switching Setup
menu, check the
01-Manual Night Mode Switching
check
box.
3. Select
Apply
to apply the settings.
Configuring Trunk Night Mode Groups (12-06: Night Mode Group Assignment for Trunks)
The configured SIP trunks (i.e.,
29
,
30
,
31
, and
32
) should be assigned to
Night Mode Group
1
. Trunk
mode groups are configure in the
12-06: Night Mode Group Assignment for Trunks
menu.
