Integrating ADTRAN eSBC and NEC SV8100
Configuring the NEC SV8100
6AOSSG0027-42A
Copyright © 2015 ADTRAN, Inc.
20
Configuring CAP Keys for Phones (15-07: Function Keys)
Call appearance (CAP) keys are required to answer incoming DID calls on phones. At least two CAP keys
should be defined for each phone on the system. A CAP key for each external trunk can be defined. To
configure CAP keys, follow these steps:
1. Select the
System Data
tab, then select
15-XX: Extension Setup > 15-07: Function Keys
from the
System Data
pane. The
15-07: Function Keys
menu will appear.
2. In the
15-07: Function Keys
menu, use the
Function
drop-down menu to assign
*08 - CAP key
to two
or more
Function Keys
.
3. Select
Apply
to apply the settings.
Enabling Caller ID Display (20-09: Class of Service Options (Incoming Call Service))
To enable caller ID display for all classes of server, follow these steps for every
Class of Service
available
(1-15):
1. Select the
System Data
tab, then select
20-XX: System Options > 20-09: Class of Service Options
(Incoming Call Service)
from the
System Data
pane. The
20-09: Class of Service Options (Incoming
Call Service)
menu will appear.
2. In the
20-09: Class of Service Options (Incoming Call Service)
menu, check the
02 - Caller ID
Display
check box.
3. Select
Apply
to apply the settings.
Configuring SIP Calling Party Numbers (21-19: IP Trunk (SIP) Calling Party Number Setup
for Extensions)
To specify the SIP calling party number for each extension, follow these steps:
1. Select the
System Data
tab, then select
21-XX: Outgoing Call Setup > 21-19: IP Trunk (SIP) Calling
Party Number Setup for Extension
from the
System Data
pane. The
21-19: IP Trunk (SIP) Calling
Party Number Setup for Extension
menu will appear.
2. In the
21-19: IP Trunk (SIP) Calling Party Number Setup for Extension
menu, enter the caller ID
information in the
Calling Party Number
field for each assigned extension.
3. Select
Apply
to apply the settings.
Specifying the Incoming Trunk Type (22-02: Incoming Call Trunk Setup)
To assign the incoming trunk type for each SIP trunk, follow these steps:
1. Select the
System Data
tab, then select
22-XX: Incoming Call Service > 22-02: Incoming Call Trunk
Setup
from the
System Data
pane. The
22-02: Incoming Call Trunk Setup
menu will appear.
2. In the
22-02: Incoming Call Trunk Setup
menu, select
DID
for the
Incoming Type
for all the service
modes for each SIP trunk (identified by its
Trunk Logical Port
number).
3. Select
Apply
to apply the settings.
