background image

Quick Start 

Guide

Overview

The 834-v6 is a carrier-class, dual-band, WiFi 6 Gigabit Router designed to deliver top-end WiFi 6 performance, multi-gigabit wired and wireless 

throughput, and advanced service delivery capabilities.

Features

The features of the 834-v6 include the following:

■ 1G WAN interface (RJ-45)
■ 4x 1G LAN interface (RJ-45)
■ POTS interface (RJ-11)

This quick start describes how to install and connect to the device. 

“Installing the 834-v6 Gigabit Router” 

on page 2

“Understanding the Status LEDs” 

on page 3

“Logging Into the 834-v6” 

on page 5

“Product Specifications” 

on page 5

“Safety and Regulatory” 

on page 6

Figure 1. 834-v6 Gigabit Router

WARNING!

f

Read all warnings, cautions, notes and installation instructions before installing or servicing this equipment.

Multi-function 

Status LED

USB Port

WPS Button

Reset Button

Status LEDs

f

     

WARNING!

f

     

CAUTION!

g

     NOTE

WARNING indicates a hazard which, if 

not avoided, could result in death, injury 

or serious property damage.

CAUTION indicates a hazard which, if not 

avoided, could result in service interruption, 

damage to the equipment, or minor property 

damage.

NOTES inform the user of additional, but 

important, information or features.

834-v6

 

Service Delivery Gateway

Wi-Fi 6 Gigabit Router

September 2022

6SDG834V6-13A

P/N: 17600023F1, 17600023F2, 17600023F3, 17600023F4

Summary of Contents for 834-v6









Reviews: