ADTRAN 1200270L1, Manual

Page: 49 / 132

Chapter 5. Configuring Network Options
61200270L1-20 DSU III ARdc User Manual 5-3
Network Address
A two-digit decimal address can be assigned to each DSU III ARdc. This
addressing capability makes it possible to perform remote configuration
and testing in point-to-point and multi-drop networks. Figure 5-2 shows
the menu path used to change the network address. The factory default
setting is
0 .
Figure 5-2. Setting the Network Address
Table 5-2 shows the AT command used to set the network address.
Remote Configuration
This option sets up the DSU III ARdc to accept or reject remote configura-
tion commands. Figure 5-3 on page 5-4 shows the menu path for
enabling/disabling remote configuration. The factory default
setting is
E
NABLED
.
Table 5-2. Network Address Command
Front
Panel
AT
Command
Description
XX (Decimal) _N=xx Assigns a two-digit network address
1=LOOP RATE
1=NETWORK OPT.
ENTER NETWORK
2=NETWORK ADDR ADDRESS:0
1=LOCAL 3=REMOTE CONFIG.
4=NETWORK TYPE
3=CONFIG 5=CLOCK SOURCE
2=REMOTE ENTER ADDRESS 2=DTE OPTIONS
3=TEST OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND