ADTRAN 1200270L1, Manual

Page: 34 / 132

Chapter 2. Installation
2-12 DSU III ARdc User Manual 61200270L1-20
If this command is entered with no parameters, the INVPS response is re-
turned. If no register number is included in the command or if it is invalid,
the INVPV response is returned. This response is also returned if the num-
ber to be stored contains invalid characters. The characters 1, 2, 3, 4, 5, 6,
7, 8, 9, 0, P, T, and & are valid dial characters. If no digits are issued with
this command, the specified register is cleared. The DSU responds with
VAL.
RLN (Request List of Numbers)
This command causes the DSU III ARdc to return the number stored in the
specified register. The format of this command follows:
RLN [REGISTER NUMBER]
If the register number is invalid, the INVPV response is returned. When a
correct register number is entered, the following response is returned:
LSN [REGISTER NUMBER];[NUMBER STORED]VAL
If no register number is present in the command, the DSU III ARdc re-
sponds with a list of all the registers and the stored numbers. This list is
followed by the VAL response.