ADTRAN 1200218L1, User Manual

Page: 41 / 122

Chapter 3. Configuration
61200663L1-1 OSU 300 User Manual 3-3
Multiplexing Mode
The M
ULTIPLEXING
M
ODE
menu allows you to select the DTE port
bandwidth increment size. The increment size of Nx75 kbps allows
the user to divide 588 blocks among the four ports. The increment
size of Nx3.16 Mbps has 14 blocks available, and ports 2, 3, and 4
are disabled. Only port 1, the built-in HSSI port, is available in this
mode. The Nx3.16 Mbps mode provides compatibility with Juniper
and Cisco routers at below full-bandwidth rates. When the user
switches the multiplexing mode, the system will reboot causing
service interruption. Loading default settings does not reset this
option.
DTE PORTS
The DTE P
ORTS
menu allows you to select a port to configure. If
R
EMOTE
A
UTO
C
ONFIGURATION
is set to M
ASTER
( C
ONFIGURATION
->
DS3 N
ETWORK
-> R
EMOTE
A
UTO
C
ONFIGURATION
-> M
ASTER
), then
a fifth option, T
IMED
P
ROFILES
, is available (see Figure 3-3). This
option allows you to set up timed profiles specifying bandwidth
allocation for all four ports.
Configuration selections for the individual ports are described in
the following section. A more in-depth description of
T
IMED
P
ROFILES
is on page 3-10.
Figure 3-3. DTE Ports Menu