ADTRAN 1200218L1, User Manual

Page: 34 / 122

Chapter 2. Installation and Operation
2-10 OSU 300 User Manual 61200663L1-1
2. Using the ADTRAN-provided terminal interface cable adapter,
connect the DTE port of a terminal to the 8-pin modular jack
labeled
CONTROL
on the front panel of the OSU 300.
3. Initialize the terminal session and allow approximately 20
seconds for initialization.
4. Press
Enter
repeatedly until the password prompt appears.
5. Enter the password. The factory default password is adtran (all
lower-case). The M
AIN
menu appears (see Figure 2-5).
6. Make selections by entering the number corresponding to the
chosen parameter. Press
Esc
to return to the previous screen.
End a terminal session by selecting L
OGOUT
from the M
AIN
menu or by pressing
Ctrl-C
at any time.
Figure 2-5. OSU 300 Main Menu