ADTRAN 1200218L1, User Manual

Page: 92 / 122

Chapter 7. Applications
7-6 OSU 300 User Manual 61200663L1-1
REMOTE SNMP MANAGEMENT APPLICATION
A remote OSU 300 can be managed by a local management station
if the remote unit is assigned its own IP address. This address must
be assigned at both the near and far ends. Also, the
D
ATA
L
INK
option must be enabled on both units.
In this application example (shown in Figure 7-4) a local OSU 300,
connected to the same LAN as the management station, provides
management access to a remote OSU 300. The local unit has the
remote unit’s IP address in its
R
EMOTE
IP A
DDRESS
field. That same
IP address is entered into the remote unit’s L
OCAL
IP A
DDRESS
field. Table 7-4 gives an example configuration for this application.
Figure 7-4. Remote Management Application
OSU 300
IP = 10.4.10.3 IP = 10.4.10.2
IP = 10.4.10.3
T3
OSU 300
Table 7-4. Configuration Example for Remote SNMP Management Application
Table 7-5. Local OSU 300
Remote OSU 300
System
Management Local IP Address - 10.4.10.2 Local IP Address - 10.4.10.3
Subnet Mask - 255.255.255.0 Subnet Mask - 255.255.255.0
Gateway IP Address -
10.4.10.1 Gateway IP Address - 0.0.0.0
Remote IP Address - 10.4.10.3 Remote IP Address - 0.0.0.0
Management Port - LAN Management Port - FDL