Adtech CNC9640, Programming Manual

Page: 134 / 161

ADTECH9 Series CNC Programming Manual
Fast
program
Designate the number of copies of CAM from the current position and then stick
automatically for the designated times.
Copy Number of copies of CAM from the current position
Stick Insert the copied CAM data into the current position
Clear Remove the current file
Help Help
Table 1. CAM instruction menu functions
5.4 CAM Instruction Configuration File
The CAMTEACH.CT order of the CAM instruction file is explained as follows.
CTSTART: Configure the starting mark for the file
CTEND: Configure the ending mark for the file
CAMINFO: Starting mark of CAM data
A: CAM type, parameter range 1-30. Currently it supports 30 types at most and can be expanded according to
the situation.
B: Number of parameters
C: CAM picture saving path, for example: 0:\\ADT\\CAMTEACH\\G151.bmp
D: Picture type: 380x380
E: The correspondent G code is G151-G180
G: The value after the parameter is the initial value involved by FGH.
F: Parameter name definition involved by FGH. The first CAM parameter is suggested to be used as
note.
H: Value range involved by FGH. The first value is a minimum one and the second a maximum one.
The examples of the ‘CAMTEACH.CT’ of the CAM instruction file are as follows.
(Format description)
(A CAM type, parameter range 1-30)
(B Number of parameters)
(C Picture saving path, for example: 0:\\ADT\\CAMTEACH\\G151.bmp)
(D Picture type: 240x180 800x480)
(E The correspondent G code G151-G180)