Modulator
Lineup
This
feature
enables
the
operator
to
quickly
view
and/or
configure
select
modulator
RF
output
parameters.
The
parameters
available
in
this
menu
are;
1. Carrier
Mode:
[
PURE_CARRIER
or
MODULATED]
2. Transmit:
[
ENABLED
or
DISABLED]
3. Output
Power:
[
in
0.5dB
increments
]
4. Output
Frequency: [
in
1.0MHz
increments
]
To
access
the
menu,
press
the
F1
and
F2
keys
simultaneously.
The
front
panel
will
briefly
flash
“MODULATOR
LINEUP”
then
display
the
menu.
Note:
To
use
this
feature,
the
front
panel
display
must
be
illuminated.
If
the
display
is
dim,
press
ANY
front
panel
button
to
illuminate
it.
Note:
If
the
unit
has
been
previously
configured
by
the
operator
and
powered
OFF
and
ON,
then
the
display
will
read
the
last
valid
configuration,
however,
Tx
will
read
DISABLED.
To
select
the
desired
Carrier
Mode,
press
the
front
panel
“SELECT”
button.
To
set
Transmit
to
ENABLED
or
DISABLED,
press
the
front
panel
“ENTER”
button.
To
set
the
desired
output
Power
Level,
press
and
hold
the
front
panel
↑
or
↓
button.
To
set
the
desired
output
Modulator
Frequency,
press
and
hold
the
front
panel
←
or
→
button.
Note:
If
the
Modulator
Frequency
is
reconfigured
when
Transmit
=
ENABLED,
then
Transmit
will
be
automatically
set
to
DISABLED.
