Adtec EN-200 User Manual Download Page 7

Page: 7 / 67

Chapter 1 - Getting Started

Front Panel

The Function Buttons and Directional Keypad of the EN-200 are used to configure and
monitor the signal input and output of the device.

Front Panel LCD Quick Views

There are several Quick Views that can be accessed via the front panel LCD by
pressing the up and down arrows.

1)

Service Data:

When in normal encoding mode, the LCD will display the following

information: TS Mux Rate, Conditional Access Mode, Service ID Number, Service Name, and
Service Provider.

Encoding Status:

This quick view displays the Input and Output Resolution, Frame

Rate, Input interface, SDI interface Mode, and Bars/Tones/ID status.

Video Status:

This quick view displays the Video PID, PCR PID, Chroma Type, Latency,

Video Bitrate, Entropy Coding, and Video Autofill status.

Summary of Contents for EN-200




































































Search results

Summary of Contents for EN-200

Reviews:

Related manuals for EN-200

Brands by name

Popular brands

Adtec EN-200, User Manual

Search results

Summary of Contents for EN-200

Reviews:

Related manuals for EN-200

Brands by name

Popular brands