Adtec EN-200 User Manual Download Page 44 | Manualshive

Page: 44 / 67

background image

Understanding Auto Transport Mux Rate

Auto Transport Mux Rate (TMR) is a feature of Adtec EN-Series built with the optional

modulator. This feature will automatically configure the overall data rate of the encoder (its
TMR;Transport Mux Rate), based upon its Modulator configuration. In other words, when the
modulator Transmit configuration is set to 'ENABLED', the encoder’s TMR becomes the
Modulator's configured Interface Rate. The TMR is a key configuration for modulator
functionality and must match the modulator interface rate.

Please note that the configured video and audio data rates must be lower than the

targeted modulation data rate for this feature to work properly.

For example, HD Video (3Mbps) + 8 pairs of Mpeg1 Layer2 @ 384Kbps ( 3.072Mbps

) = ~6.2Mbps.

The TMR will not fit into a 3MBaud DVB-S QPSK 3/4 modulation configuration ( As

3Mbaud with this settings would only support a data rate of 4.14Mbps). In this case,
additional audios would need to be turned off or rates adjusted to meet the 4.14Mbps
modulation data requirement.

«
...
42
43
44
45
46
...
»

Summary of Contents for EN-200




































































Reviews:

No comments

Related manuals for EN-200

Brand: Ramsey Electronics Pages: 20

Brand: Yamaha Pages: 32

Brand: Cerwin-Vega Pages: 12

GX200 II Series

Brand: Redgum Pages: 20

Brand: Audio Technica Pages: 11

Brand: G2 Pages: 13

Brand: CEL-MAR Pages: 16

Brand: Trix Pages: 40

LokPilot Fx micro V3.0

Brand: Esu Pages: 72

Brand: Pro-Ject Audio Systems Pages: 3

Brand: SMA Pages: 48

Brand: Wavetronix Pages: 13

Brand: Powerlink Pages: 4

Brand: V-TAC Pages: 42

Brand: V-TAC Pages: 55

Brand: V-TAC Pages: 36

Brand: Baumer Pages: 32

Brand: AJA Pages: 47

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands