ADLINK Technology SP-15W03 Series, User Manual, Page: 87 / 110

BIOS Settings and Driver Installation 73
SP-15W03
Setup Menus
to serial ports, you must reboot system and enter setup menu
again. The change of setting of this item depends on the configu-
ration of serial port setting.
Serial Port Mode
Select the baud rate you want serial port to use for console redi-
rection.
Flow Control
Set this option to select Flow Control for console redirection.
Redirection After BIOS POST
This option allows you to set Redirection configuration after BIOS
POST. When Disabled, console redirection will be turned off after
POST. When Boot Loader, it allows redirection to be active during
POST and boot loader. If it is set to Always, the redirection will
always be active.
Terminal Type
This option is used to select either VT100/VT-UTF8 or ANSI termi-
nal type.
VT-UTF8 Combo Key Support
This option enables VT-UTF8 combination key support for ANSI/
VT100 terminals.
Sredir Memory Display Delay
This option gives the delay in seconds to display memory informa-
tion.