ADLINK Technology NuPRO-A301, User Manual

Page: 42 / 80

30 Getting Started
3.3 Installing the Power Connectors
Refer to Section 2.2 Board Layout on page 10 and Section 2.3
Onboard Connectors on page 12 for detailed information on con-
nectors and pin definitions referred to below.
ATX 12V Power Connector
The NuPRO-A301 re12V DC power connected to CN4 for
proper operation in either ATX or AT modes . If necessary, order a
ATX12V Convert Cable from ADLINK for use with Molex 4-pin
power connectors (P/N 30-00006-0000).
Front Panel Connector
Before powering up the NuPRO-A301, connect the necessary sig-
nals from the backplane to the Front Panel Connector (JPB1). The
ATX Power Connector pin group (pins 11, 13, 15, 17, 19) and
Power On Button pin group (pins 18, 20) must be connected for
the system to power up in ATX mode.