ADLINK Technology NuPRO-A301, User Manual

Page: 67 / 80

BIOS Setup 55
NuPRO-A301
5.7 PnP/PCI Configurations
PNP OS Installed
If all your operating systems support Plug & Play (PnP), select Yes
so that they can take over the management of device resources. If
you are using a non-PnP-aware OS or not all of the operating sys-
tems you are using support PnP, select
No to let the BIOS handle
it instead.
Init Display First
This item allows you to choose the first display interface to initiate
while booting. Options: “PCI Slot” or “Onboard”.
Reset Configuration Data
The default is “Disabled”. Select Enabled to reset Extended Sys-
tem Configuration Data (ESCD) if you have installed a new add-on
card, and system configuration is in such a state that the OS can-
not boot.
Resource Controlled By
The options are “Auto(ESCD)” or “Manual”. Choosing “Manual”
requires you to choose resources from the following sub-menus.
Phoenix – Award BIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed
Init Display First
Reset Configuration Data
Resources Controlled By
X IRQ Resources
X DMA Resources
PCI/VGA Palette Snoop
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
No
PCI Slot
Disabled
Auto (ESCD)
Press Enter
Press Enter
Disabled
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Item Help
_____________________________
Menu Level
¾
↑↓→←
Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults