ADLINK Technology NuPRO-A301, User Manual

Page: 66 / 80

54 BIOS Setup
MODEM Use IRQ
This determines the IRQ in which the MODEM can use. Options:
NA, 3, 4, 5, 7, 9, 10, 11.
Suspend Mode
Enable/disable system suspend. When “Enabled” and after the
set time of system inactivity. All devices except the CPU will be
shut off. Options: Disabled, 1 Min, 2 Min, 4 Min, 8 Min, 12 Min, 20
Min, 30 Min.
HDD Power Down
When “Enabled” and after the set time of system inactivity, the
hard disk drive will be powered down while all other devices
remain active. Options: Disabled, 1-7 mins.
Soft-Off by PWR-BTTN: Configures the power button:
X Instant-Off: The power button functions as a normal power-
on/-off button.
X Delay 4 Sec: The system is turned off if the power button is
pressed for more than four seconds. Pressing the button
momentarily (for less than 4 seconds) will switch the system
to “suspend” mode.
Wake-Up by PCI card
An input signal from PME on the PCI card awakens the system
from a soft off state. Options: “Enabled” and “Disabled”.
Power On by Ring
Select “Enabled” to power on the system from a soft off state by an
input signal on the serial Ring Indicator (RI) line. Options:
“Enabled” and “Disabled”.
Resume by Alarm
When “Enabled”, set the date and time at which the RTC (real-
time clock) alarm awakens the system from suspend mode.
Options: “Enabled” and “Disabled”.