manualshive.com logo in svg

ADLINK Technology NuPRO-720, User Manual

Share
Download
ADLINK Technology NuPRO-720 User Manual Download Page 13

Introduction

 1

NuPRO-720

1

Introduction

This chapter will introduce the NuPRO-720, its features, specifica-
tions and applications. This chapter also provides detailed infor-
mation about the mechanics of the product and technical
information to assist users.

1.1

Package Contents

Please check that your package contains the items below. If
you discover damaged or missing items, please contact your
vendor.

X

NuPRO-720 SBC

X

2-port USB bracket and cable

X

COM and Printer port bracket and cable

X

COM bracket and cable

X

SATA cable

X

SATA power cable

X

PS/2 Y cable

X

ADLINK All-In-One CD

X

User’s Manual

WARNING:

DO NOT

 install or apply power to equipment that is dam-

aged or if there is missing/incomplete equipment. Retain 
the shipping carton and packing materials for inspection. 
Please contact your ADLINK dealer/vendor immediately 
for assistance. Obtain authorization from your dealer 
before returning any product to ADLINK.

Summary of Contents for NuPRO-720



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands