Operation Theorem
•
43
Trigger Level digital setting
Trigger voltage
0xFF
9.92V
0xFE
9.84V
---
---
0x81
0.08V
0x80
0
0x7F
-0.08V
---
---
0x01
-9.92V
0x00
-10V
Table 4.5.1 Analog trigger SRC1(EXTATRIG) ideal transfer characteristic
The trigger signal asserts when an analog trigger condition is meet. There
are five analog trigger conditions in DAQ/PXI-2500 SERIES.
DAQ/PXI-2500 SERIES uses 2 threshold voltages: Low_Threshold and
High_Threshold to compose 5 different trigger conditions. Users can con-
figure the trigger conditions easily via software.
4.5.2.1 Below-Low analog trigger condition
Figure 4.5.2 shows the below-low analog trigger condition, the trigger
signal asserts when the input analog signal is lower than the
Low_Threshold voltage. High_Threshold setting is not used in this trigger
condition.
Figure 4.5.2 Below-Low analog trigger condition
Summary of Contents for NuDAQ DAQ-2500 Series
Page 3: ......
Page 26: ...Operation Theorem 17...
