ADLINK Technology MI-960, User Manual

Page: 60 / 98

46 BIOS Setup
Serial Port Mode
Select the baud rate you want the serial port to use for console
redirection. The options are
115200 8,n,1
;
57600 8,n,1
;
19200 8,n,1
; and
09600 8,n,1
.
Flow Control
Set this option to select Flow Control for console redirection.
The settings for this value are None, Hardware, or Software.
Redirection After BIOS POST
This option allows you to set Redirection configuration after
BIOS POST. The settings for this value are Disabled, Boot
Loader, or Always.
X
Disabled:
Set this value to turn off the redirection after
POST
X
Boot Loader:
Set this value to allow the redirection to be
active during POST and Boot Loader.
X Always:
Set this value to allow the redirection to be always
active.
Terminal Type
This option is used to select either VT100/VT-UTF8 or ANSI
terminal type. The settings for this value are
ANSI
,
VT100
, or
VT-UTF8
.
VT-UTF8 Combo Key Support
This option enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals. The settings for this value are Enabled
or Disabled.
Sredir Memory Display Delay
This option gives the delay in seconds to display memory infor-
mation. The options for this value are
No Delay
,
Delay 1 Sec
,
Delay 2 Sec
, or
Delay 4 Sec
.